home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr39
/
sd503.zip
/
HISTORY.DOC
< prev
next >
Wrap
Text File
|
1993-05-25
|
15KB
|
451 lines
This is HISTORY.DOC - Records the development of Super-Duper.
Version 5.03 11th February 1993
Contests with multipliers. Bug found - not reported by any users.
When the band was edited on a logged QSO, if there was a QSO which
had been a dupe of the edited QSO on the original band, and which was
now a multiplier, in addition to being no longer a dupe, then it was
not scored correctly. This had been treated correctly, but at some
time in the past few weeks I had altered some code without realising
its significance. Now corrected.
Contests with Serials. Potential dupes did not report the Serial
Received - due to a typing error in 5.01. Corrected.
Version 5.02 30th January 1993
All contests: PRINT generates a print file NAME.PRT on disk where
NAME is the callsign used. To print it, use the DOS COPY or PRINT
commands. Super-Duper does not support printers directly, because
a printer fault could interrupt logging. You may reformat the .PRT
files with a word processor or text editor.
Version 5.01 25th January 1993
All contests: For potential dupes, the on-screen message is now
highlighted. Thanks GW0ANA.
Version 5.0 15th January 1993
This was originally to be Version 4.10. However, the introduction
of a new logging mode, described below, meant that I've had to change
the layout of the contest log (.ALL) file, which in turn means that
logs from earlier versions of the program will not be compatible with
this version.
You should keep the previous version of the program until you no
longer need it for any previous contest logs you may have. In the
meantime, you might use a separate directory, for example NEWSD,
for this version.
Logging Mode. In the past, it was assumed that your RST Sent was
always 59(9). To allow for contests or styles of operating where
this is not appropriate, I've added a new logging mode which gives
more flexibility with RSTs but which may not be suited to high speed
operation.
Since this is an additional and separate logging mode, there has been
no compromise with Super-Duper's traditonal logging mode. You can
switch from one mode to the other by typing "RST" in the callsign
field followed by Enter.
There are also significant changes to the program in terms of
supporting additional IARU national society contest types - i.e. those
similar in structure to Type 4 - RSGB contests for DX entrants, and
Type 10 RSGB contests where UK entrants work both UK and DX.
Basically, County, Zone and State multiplier IDs are now held in
separate ASCII text files corresponding to each contest type. For
example, the UK county codes and corresponding descriptions are now
held in both SDTYPE4.MLT and SDTYPE10.MLT.
There are two main benefits. The first is that the information is
no longer hard-coded in the program (with some exeptions relating to
choice of abbreviations for the state in ARRL contests). Therefore,
the program is smaller, which permits an additional 200 QSOs to be
logged in all contests. The maximum in the ARRL DX contest is now
4200.
However, the major benefit is that you can edit the multiplier files,
using a text editor, to reflect any necessary changes in existing
contests and, more significantly, you can set up new files to cater
for other contests - for example, the Helvetia contest which uses
2 letter identifiers for cantons. All you have to do is to use the
same format as in the existing Type 4 or Type 10 MLT files.
This is a 2 or 3 character multiplier identifier (always the same
length for a particular contest), followed by an equals "=" sign.
You have the option to include a description of the multiplier after
the equals sign. Descriptions can be up to 28 characters long - any
longer and they will be truncated. You can have a maximum of 96
multipliers. Any additional ones are ignored.
When you do start to experiment, be sure to keep a backup copy of
your original MLT files.
NOTE : You are advised not to edit any multiplier files other than
SDTYPE4.MLT and SDTYPE10.MLT. If you edit the others, the results
may be unpredictable.
TYPE 5, ARRL 10 Metre Contest. Under certain circumstances the serial
received from the previous QSO was logged for the current QSO,
even though a different one was entered. Corrected.
The LOG file created by the WRITE command did not print the
State for W/VE QSOs. This was due to an error arising from
the need to print spaces when a Zero serial is recorded.
Corrected.
RSGB Contests: For CW QSOs which qualify for Bonus points, the letter
B is sounded rather than ML (multiplier).
All Contests: F10 now recalls the Quick Memo table. To abandon a QSO
or an Edit, you must use Minus - no alternative is provided.
Whenever you log EI5DI, you get a message saying you deserve
extra points. I know it's frivolous but I like it. In some
earlier versions this caused screen alignment problems.
When you start SD and reach the second screen, the first
option now is COM1 or COM2 for cw contests. The default is
COM1. This assigns the serial port which will be activated by
the keyer. It is of no significance in SSB contests. To
return to this option you must restart SD. Thanks G3KAF.
TYPE 11 - General Purpose Option - where you answer N to RoPoCo?
Several minor problems corrected. When editing the Info
Received field, leading zeroes were deleted, and also you
could not use Enter to leave this field (although edits took
effect if you left with TAB and then used Enter from any
other field). Corrected.
Under certain circumstances the log file (from WRITE) was
incorrectly formatted for the non-RoPoCo option. Corrected.
Thanks G4WYG and G3KAF, who also suggested facility to have
user defined points per QSO. Done! In addition, TYPE 11 is
no longer restricted to CW only.
TYPE 6 - WPX Contest. F6 now displays corresponding prefixes
worked and needed even when the character(s) cannot be
uniquely associated with any country in the CTY file.
SDCHECK - When multipliers were marked manually (with a text editor)
on the .ALL file for the CQWW contest, the country multiplier
list was not printed in certain circumstances.
Corrected. Thanks G3KMA.
The checklist file now has a .LST suffix rather than .LOG
which could be confused with a log file. So, the checklist
(dupe sheet) file is now CHECK.LST.
For WPX and RSGB checklists, serial sent is now printed
instead of time of QSO. Thanks G6LX.
Version 4.07 6th December 1992
SDCHECK. The summary sheet now gives the correct score in RSGB
contests with bonus points.
Version 4.06 18th November 1992
RSGB Contests: - Problem noted as corrected in 4.03 regarding
operators in multi-op contests was not fixed properly.
It also caused QSO edits to be ignored, because the edits
were written to the .OPR file instead of the .ALL file due
to a mixup in file numbers. Now fixed!!
Version 4.05 28th October 1992
SDCHECK - Under certain conditions it would list incorrect DXCC
multipliers in the multiplier summary. (However, they were
correct in the .LOG file created by the WRITE command in SD).
Note: new records can be inserted in any position in the .CTY
files but it's tidier to keep them in sequence (by standard
prefix).
All Contests: When you suppress sounds, using NOSOUND, potential dupes
will still give an audible warning. Thanks HB9AGA.
Version 4.04 17th October 1992
SDCHECK not giving multiplier lists for RSGB Contests where UK
entrants work DX only (Type 9 contests). Corrected.
Evaluation version "Licensed to DEMO", allows full facilities
in Type 1, ARRL DX contest for DX entrants, and in Type 4, RSGB
contests for DX entrants.
Version 4.03 8th October 1992
All Contests: Error in country identification routine meant that
calls of the type G0ABC/VK were identified correctly as a VK
multiplier, if appropriate, but the log and the multiplier
summary listed a G multiplier. Thanks G4ADD.
Commas not permittted in name and address fields. They caused
problems because PowerBasic saw them as record delimiters.
Thanks G4ADD.
RSGB multi-op contests. Operators now recorded correctly.
Version 4.02 3rd October 1992
RoPoCo option extended to give a choice between RoPoCo specifically,
and general purpose - with appropriate print layouts after WRITE.
Version 4.01 29th September 1992
Callsign Edits which changed the country had a potentially
fatal bug due to the new country reference number not being
zero filled, if necessary, when the QSO record was rewritten.
Now corrected.
Version 4.00 23rd August 1992
Type 0 ARRL DX for W/VE Side added.
Type 5 ARRL 10m. Now tracks DXCC multipliers after Edits, in
addition to State/Province multipliers.
Program SDCHECK added. Generates check lists & multiplier lists
in CHECK.LOG, and a summary sheet in SUMMARY.DOC.
Minus - alternative to F10 to wipe a QSO or abandon an Edit.
Thanks HB9AGA.
Prefix checking routine.
Bug corrected which caused crashes when the callsign
ended with / while logging or editing. Thanks EI7DNB.
Callsigns beginning with 0 (Zero) trapped. Thanks EI9FK.
Version 3.36 12th August 1992
Type 11 RSGB RoPoCo option added.
Can be used as a general purpose option.
Thanks to HB9AGA for the following suggestions.
Quick Memo added. Updated by Esc or F10 during logging.
Keyer: Ctrl-Z to Ctrl-R - alternatives to Alt-F1 to Alt-F10.
Version 3.35 7th August 1992
Thanks to G3XTT for the following suggestions.
Serial No. 0 permitted. Equivalent to no serial received.
Multi-Op added to RSGB contests - uses .OPR files.
Exit provided on Cover Screen.
Comma and Full Stop - alternatives to F7 and F8
for Prefix and Suffix checks. Thanks HB9AGA.
Version 3.34 11th July 1992
Mixed-mode added for IARU contest.
Dupes no longer display IARU or CQ zone - Zone must be
entered manually to log the dupe.
Version 3.33 28th April 1992
RSGB contests for UK entrants options added. (Work DX or work all).
All current scoring options provided for, including 7 MHz CW contest.
Suffixes such as /P /QRP now taken into account when checking
for dupes after edits of QSOs already logged.
Version 3.32 13th April 1992
Bug located - points not increasing when Dupe cancelled by edit.
RSGB contests for DX entrants: Bonus or Multiplier choice.
WPX. NA-NA QSOs 2 points high bands, 4 points on low bands.
Version 3.31 25th March 1992
Option to Edit using Up and Down Arrow keys.
Type 4 (RSGB for DX entrants) takes points per QSO from Cover Sheet.
Keyer speed now independent of weight.
Version 3.30 17th March 1992
Not shareware any more. QSO limit included in Demo versions.
Speed fixed at 12 wpm in Demo versions.
Version 3.22 9th March 1992
PEI, NB and LB now separate multipliers for ARRL DX contest.
Version 3.21 29th February 1992
Memory keyer added, with variable speed and weight.
Prefix/DXCC consistency check added.
Version 3.20 23rd February 1992
Added SSB Field Day - Type 8.
QSO rate updated every 10 seconds
Version 3.19 12th February 1992
Added CW Field Day - Type 7.
SPLITLOG gives log by band
Version 3.18 10th February 1992
Scoring corrected for RSGB and IARU options
Version 3.17 2nd February 1992
Bugs in prefix analysis sorted out - WPX Contest.
Version 3.16 26th January 1992
Allows Band changes in Edit mode, and recalculates multiplier
and points totals on both bands.
Version 3.15 19th January 1992
Added WPX Contest - Type 6.
MEMO writes memo to .MMO
Version 3.14 3rd January 1992
DUMPLOG dumps a copy of the contest file (.ALL) to Drive A.
Bug corrected:
RST not being updated when State also changed during EDIT.
Version 3.13 13th December 1991
F4 Displays, by continent, countries worked/needed by band
F5 Displays countries worked by band.
Version 3.12 3rd December 1991
Added Type 5 - ARRL 10m contest with DXCC multipliers.
Used by EI5DI to get world first place in the mixed-mode
low-power (150w) section.
F3 routine added to display States/Zones worked by Band.
Version 3.11 20th October 1991
Monochrome support added.
Added country multiplier checking to CQWW.
Version 3.10 13th October 1991
Major expansion: That's why it's out of sequence.
Added support for CQWW, IARU and RSGB (DX Side) contests.
All log data now recorded in a single ASCII file.
HELP display added.
Bug in setup screen corrected. SD without File Name gave problems.
Version 3.03 23rd September 1991
QSO rate corrected after Band change or Edit by
temporarily decrementing serial.
Dupe and Multiplier indicators filed separately.
All Bands option added to Multiplier Display table.
State/Zone edits now keep multipliers consistent.
Version 3.02 12th September 1991
Partial lookup by suffix added.
Problem with multiplier (state) numbers corrected by using strings
instead of binary. QSO record length unchanged.
Version 3.01 '9th September 1991
PEI and NB were not being flagged as multipliers (= NS).
Allow PE for Prince Edward Island.
Total score now correctly reflects dupes created or deleted by edit.
Off-line time recording included.
Version 3.00 'July 1991
ARRL DX Contest only. Written in PowerBasic.
Version 2 'January 1991
ARRL DX Contest only - Written in QuickBasic
Used RAMDRIVE for the log to get over QuickBasic string limitations.
Version 1 'February 1990
ARRL DX Contest - Written in GWBASIC.
Used by EI5V multi-op team to score nearly 2 million points in
the SSB contest March 1990.
Super-Duper Copyright 1990-1993 Paul O'Kane EI5DI
All rights reserved. 36 Coolkill
Sandyford
Dublin 18
Ireland.